ART SNAKE ANCHOR

The Snakeanchor from ART serves as lanyard and anchoring device, it can be continuously adjusted thanks to the stitched intervals. The Snakeanchor can be installed open and used as friction device with pulley or biner in the desired length. It also can...

ART SNAKETAIL

The ART SnakeTail is an incredibly versatile climbing and rope access tool. The SnakeTail can be used as a redirect, footlocking prusik, adjustable friction saver and so much more. It has dozens of applications. The grooved ring of the SnakeTail is...

BUCKINGHAM MINI PORT-A-WRAP

Buck PORT-A-WRAPS are compact rope friction devices designed for lowering heavy objects from height in a controlled and predictable manner. The Buck Port-A-Wrap has been widely popular among the modern-day arborist, old school arborist would lower heavy...

CLASSIC SWIVEL LOCKING SNAP HOOK

This steel snap features a swivel eye to eliminate twisted and tangled climbing lines. Length: 7 1/16"Opening: 13/16" MBS: 23 kN

CLIMBING TECHNOLOGY OTTO RESCUE 8

The "rescue" figure 8 descender from Climbing Technology of Italy has ears which are designed to prevent the rope from slipping up to the top and forming a girth hitch which can strand the climber until they can remove their weight from the device...

CMI ARBORIST SHACKLE

CMI introduces the new arborist shackle.  Starting with a blank 5/8 steel shackle, we machine out the holes to accept a custom built "slic" pin which cannot be lost at height!  Then we zinc plate the entire shackle to prevent rust.  A...

CMI DAISY CHAIN, RIGGING CHAIN

1" Tubular webbing with bar-tacked loops provides multiple attachment points.Strength:    Loops: 3400 lbs    End to End: 4000 lbsMaterial: 1" tubular webbing

CMI ROPEJACK

The CMI RopeJack is a mechanical advantage tool for quickly and easily pre-tensioning static lines, light lifting, and cabling. The RopeJack is small and light enough to be carried aloft by a climber, and the length of the handle on the RopeJack limits...

CMI RP130 5/8" STEEL ARBORIST RIGGING BLOCK

The RP130 is a 5/8" capacity arborist block from CMI. It is designed for use in false crotch systems to help save wear and tear on bull ropes. The upper bushing maximizes sling strength and wide side plates protect the rope from contact with rough bark...

CMI RP131 ARBORIST PULLEY/RIGGING BLOCK

The RP131 arborist block from CMI was designed for use in false crotch systems to help save wear and tear on Bull ropes. Upper bushing maximizes sling strength and wide side plates protect the rope from contact with rough bark. Convenient knurled knobs...

COBRA 2T/4T 3 SYSTEM PACKAGE

For Branches/Stems up to 24 inches in diameter at the crotch. Contains enough for 3 systems:20 m (65.6 ft) of 2 t (14 mm) rope & 4 t (22 mm) rope5 m (16.4 ft) of anti-abrasion hose6 expansion inserts3 shock absorbers8 end caps.

DMM ARBORIST RIGGING HUB

Complex 3D rigging focused onto a single anchor. The DMM rigging hub can be used to form a super strong centralized anchor point for use in tree work, rope access and rescue. Radius surfaces throughout allow direct rope or textile attachment -...